Lab Equipment Calibration

Request Service

ThermoVerra keeps your lab equipment reading true and your records inspection-ready. Our technicians calibrate against NIST-traceable references, and every certificate shows the as-found and as-left readings.

Calibration Services

What you can expect for every calibration:

  • Traceable References: Every reading is taken against NIST-traceable reference instruments with current certificates.

  • As-Found Readings: We record how the unit performs against your acceptance limits.

  • Adjustments: If a parameter reading is out of tolerance, we adjust the unit and record the as-left reading.

  • Certificate: Every unit gets a signed certificate for your CAP, CLIA, or Joint Commission records.

What We Calibrate

Freezers & Refrigerators

Temperature at setpoint, display and probe; high and low alarm set points

Sterilizers / Autoclaves

Chamber temperature and pressure, cycle time, and the cycle record

Centrifuges

Speed (RPM), timer, and chamber temperature on refrigerated models

Incubators & Chambers

Temperature, COâ‚‚ concentration, and relative humidity

Calibration Certificates

  • Unit: Equipment information and location

  • Reference Instrument: Make, model, serial number, accuracy, and calibration due date

  • Parameters: Key metrics (temperature, speed, time, pressure, COâ‚‚), test points, and acceptance limits

  • Readings/Adjustments: As-found reading, any adjustments made, and as-left reading

  • Result: Pass or fail, recommendations, technician signature, and date

Inspection-Ready

CAP, CLIA, and Joint Commission inspectors expect defined acceptable limits for each instrument, records of every check, documented corrective action when something is out of range, and reference instruments traceable to a NIST standard. Our certificates give you the paper trail you need for accreditation

FAQs

  • At least once a year, or at the interval your quality plan, accreditor, or manufacturer sets. We typically calibrate units during each PM visit.

  • Yes. Our reference instruments carry current calibrations traceable to NIST, and every certificate lists the instrument used and its calibration due date.

  • Yes. Most customers have both PMs and calibrations done at the same time for ease of scheduling.

Schedule Your Calibrations

Request Service